451mm 20inch Carbon Expert BMX Race Rim Junior Carbon BMX Rims Vendor

PAVI has been a professional Carbon BMX Rims original supplier to many of the world’s leading BMX brands. Especially in the USA, France, UK, Australia, Netherlands, Belgium, Canada. And they are widely ridden on famous tracks as UCI BMX Supercross, USA BMX, Olympic, UEC, etc. We have been used to see them on the races podiums representing for different brands.

If you are looking to save weight and improve your speed on the track, the lightness and stiffness of our carbon rims will help you to lead the pack!

Pavi carbon bmx rims are made from Toray T700 mixed with T800 carbon fiber and available in UD, 3K, 3K Twill, 12K, 12K Twill and Marble weave carbon, with customized 16~36H spoke holes and Presta(6.5mm) or Schrader(8.5mm) valve hole.

20″ 451mm Expert/Jr BMX rim fits tires 20×1-1/8″, 20×1-3/8″ and 20×1.60″

Technical information for assembling:

• Maximum tires pressure: 130psi/8.97bar
• Maximum spokes tension: 300kg
• Maximum rider weight: 130kg
• ERD data is spoke measurement size, check below form.

Our braking surface can resist to 240 Degrees Celsius, but we advise to use specific brake pads to have a better and safer braking performance.

All Pavi carbon rims must pass ours tests before the production process. Test standard base and exceed EN ISO 4210.

Before to validate the development of our rims with:

• Lateral Static Load Test
• Horizontal Rigid Test
• Horizontal Impact Test
• Spoke Tension Test
• Braking Test

And we also test the rims during production according:

• Flatness test: <0.25mm
• Roundness test: <0.5mm
• Dynamic Equilibrium: <3g
• Torsion Strength: >50kg
• Ultimate Strength: >200kg

KEY FEATURES:

• 4D Drill Technology. The 4 directions angled spoke drilling holes that follow the path of the spokes. Make the rim greater strength and durability.
• Low Profile Design for optimum stiffness and damping. Reduces the buffeting effect of cross winds on outdoor tracks. Don’t be afraid of crosswinds at the track anymore!
• Specific resin rims brake track is designed for BMX race and street. Carbon specific pad required.
• Wider Design. gives a slightly larger volume to the tyre, meaning you can run less air pressure for a better ride, while still maintaining rolling speed.
• The inside of the rim had been especially designed for high pressure tyre mounting. The rims are super stiff and strong, yet still achieve a low weight.
• Wider Section. 23/25mm rim wide for 20×1-3/8″ tyre. This is a stiff and strong rim for sure! Thought and developped for those young riders who already send big jumps.